Lowyat.NET: Latest topics by OC4/3

WTS:Hynix 256MB DDR 2 533 CL4-4-4-11

OC4/3 — Wed, 04 Nov 2009 03:46:50 +0800

Item(s):Hynix 256MB DDR 2 533 CL4-4-4-11

Package includes:Ram and value ram clampshell

Price:RM8

Warranty:None

Dealing method:COD or Poslaju

Location of seller:LYP or Kepong

Contact method/details:PM Me

Age of item:No idea

---

Item(s) conditions:Working

Reason for sale:Collect money

Hwbot country cup

OC4/3 — Mon, 26 Oct 2009 00:10:22 +0800

Hey to all lyn forumer,here is a competition that need a lot of people from malaysia regardless of benchmark team,race etc

HWBot Country Cup 2009
7 stages, 7 weeks, 7 prizes, 150 countries

1. Concept

The competition consists of seven benchmarks spread over seven weeks. In other words, chances are big that you will not have the time to submit a world record breaking result, which makes it interesting to see who will come up with the best result within a very limited time-frame. The results are grouped per country and countries are ranked based on the average score of the top-3 submissions. So, in order to win, you will have to motivate your fellow overclockers to submit good results. Per stage, countries are awarded points and the country that gathered most points at the end of seven stages wins the competition.

2. Stages

For each stage, the HWBot staff has prepared a combination of platform and benchmark. To keep things exciting, we will not reveal the combination, but only the list of platforms and benchmarks. This prevents people from benching in advance and preserves the concept of one-week benching, but still allows people to prepare as you can already figure out the limitations of the platform. The only two people who know the combination of the platform and benchmarks are RichBa5tard and Massman. Evidently, both can not win anything in this competition.

2.a. Benchmarks

* 3DMark01
* 3DMark Vantage
* Pifast
* SuperPI 1M
* SuperPI 32M #1
* SuperPI 32M #2 (different hardware limitations)
* Wprime 32M

2.b. Required hardware

In order to make this competition fun and challenging, each stage will have certain hardware limitations. For example, we could limit the 3DMark01 stage to only use a Intel Core 2 Quad processor. The hardware requirements for each stage will be announced a few days before the start of the stage.

Hardware required if you want to compete in all stages:

* AMD processor
* AMD/ATI videocard
* A P55 motherboard
* Intel Core 2 Quad (not extreme)
* Any single core processor
* Any Intel Core i7 processor

If you do not own this hardware, either go bargain hunting or encourage fellow countrymen with this hardware to join the competition. There are 7 stages in this competition, so it’s not a disaster if you can’t compete in one of the stages due to hardware limitations. Remember, in the Country Cup competition it’s not important how high you score, it’s important how high your country top 3 average is.

For more info,go to annoucement

So fella malaysia ocer,get prep for this competition and hope we can be somewhere

overclocking-tv.com

OC4/3 — Mon, 19 Oct 2009 00:04:56 +0800

Hey all,if any one you have a lot of interest in extreme oc,go to this stie:http://overclocking-tv.com/
This site owner,trouffman from france provide live feed to various oc competition or demo
On air today are legendary hipro5 benching with I9,broken SPI 1M record
The quality is a bit rough but i guess it is ok heh

[WTS]Hynix DDR333 CL2.5 128MB

OC4/3 — Tue, 13 Oct 2009 10:34:17 +0800

Item(s):Hynix DDR333 128MB Ram

Package includes:RAM Lar,with kingston value ram clampshell lor

Price:RM5 1 stick

Warranty:No warranty

Dealing method:COD

Location of seller:Kepong/LYP

Contact method/details:PM here

Age of item:Unknown

---

Item(s) conditions:Working condition

Reason for sale:No use for it so sell

PC Technician Post avalible

OC4/3 — Mon, 14 Sep 2009 16:08:19 +0800

Name of Company:ACE AV Solution

Role:PC Tehnicial

Requirements:Need to know how to speak chinese/english at minimum,chinese only and experienced person preferred

Contact Person:Mr.Ang,012-3661472

How to bypass Port 80 Block

OC4/3 — Thu, 16 Jul 2009 16:27:51 +0800

Hey guys.
Anyone know how can i bypass port blocking schedule on my router???
Router is Dlink 524UP,gigabit lan.
Basically my BT can download but i cannot browse web/chat during certain time.

WTS:HTC Touch P3452

OC4/3 — Sun, 31 May 2009 00:34:59 +0800

Item(s):HTC Touch V2 Black Colour

Package includes:Standard accessories with no box and one extra battery and 1GB memory as well

Price:Bidding System,Sold once reserve are met

Warranty:Not sure but taiwan warranty and first week personal warranty

Dealing method:COD/Postage

Location of seller:KL,Can Cod in LYP anyday you want

Contact method/details:PM me

Age of item:A few month

---

Item(s) conditions:99%,0 call time with screen protector attached

Picture:
» Click to show Spoiler - click again to hide... «

Reason for sale:Helping friend to sell
Spec:
T1OMAP 801 200mhz processor
128MB Ram,256MB Rom
Black In Color
Window mobile 6.1 ori rom
Now,going to use bidding system.Reserve are RM500[SIZE=7]

» Click to show Spoiler - click again to hide... «

Bid list:
[1.)Nakhtaladakh RM470
2.)babylon RM460[/b]
3.)ochampedro RM450
Keep the bid coming,whoever offer me the reserve price or around it get the phone

WTS:Galaxy 9600GSO Extreme Tuner 384MB

OC4/3 — Wed, 18 Mar 2009 01:42:39 +0800

Item(s):Galaxy 9600GSO Extreme Tuner 384MB

Package includes:GC,PC-DVI and some stuff that come with it lor

Price:RM250(Slightly negotiable)

Warranty:Unsure lar but SDS is the distro

Dealing method:COD/Postage

Location of seller:KL

Contact method/details:PM Me

Age of item:8-10months

---

Item(s) conditions:Nice lor

Picture:Lazy to upload so post manufacturer pic

Reason for sale:Gotten 8800GTS so let go old gc off

T&C:

» Click to show Spoiler - click again to hide... «

Folding PPD is from 2.9k-4.6k or so,depend on WU
Max stable on 3d is 700/1674 or so and on folding 700/1728 work fine

Technician

OC4/3 — Wed, 04 Mar 2009 15:42:04 +0800

Hi,

My father shop now happened to have a vacancy
Job is computer technician mainly,so yeah must know the basic of fixing computer(Troubleshooting and fixing)
Must know how to speak English/Cantonese as need to look out for shop
Job location is 2nd floor LYP
Salary:RM900 + allowance
Contact:012-3661472(Mr Ang)

SPI 1M E8xxx Database/Challange

OC4/3 — Thu, 08 Jan 2009 15:05:23 +0800

This is database/challenge for Intel E8xxx series
Rules & Requirements:
1.Database for SPI 1M
2. Following must include in a screenshoot:CPUZ showing CPU and memory setting and your SPI pass.
3. Provide details about your system. Include cpu, motherboard, ram,os.Follow the sample below
4. Every single window must clearly showing all the details that is required from rule no.2.
5.If time is tie,the one with lower/better performance point get the upper rank
Performance Point=time x mhz=performance point,lower mean the run is more well tweaked
6.Air/Liquid for now,sub zero section will be open when someone start to posting sub zero result

QUOTE

Posting format:
9.204/OC4/3/Intel E8500 E0@4940mhz/Team Xtreem DDR 2 1066mhz CL5@520mhz,CL4-4-4-4/Abit IP35 Pro/Dtek Fuzion V2/Window XP SP2 Daily/45467 PP

» Click to show Spoiler - click again to hide... «

E8600
1.
2.
3.
4.
5.

E8500/E3120
1.9.204/OC4/3/Intel E8500 E0@4940mhz/Team Xtreem DDR 2 1066mhz CL5@520mhz,CL4-4-4-4-2T/Abit IP35 Pro/Dtek Fuzion V2/Window XP SP2 Daily/45467 PP

» Click to show Spoiler - click again to hide... «

2.
3.
4.
5.

E8400/E3110
1.9.39/OC4/3/Intel E8400 C0@4824mhz/Crucial Ballistix Tracer@536mhz,5-5-5-10-2T/Abit IP35 Pro/Dtek Fuzion V2/Window XP SP2 Daily/45297 PP

» Click to show Spoiler - click again to hide... «

2.11.812/Jibek/Intel E8400 E0@4012Mhz/Team Xtreem DDR2-1066 CL5@642.0Mhz,CL5-5-5-15/Gigabyte EP45-UD3P/Xigmatek S1283/Windows XP SP3 Daily/47389 PP
http://forum.lowyat.net/index.php?act=Atta...=post&id=753137
3.
4.
5.

E8300
1.
2.
3.
4.
5.

E8200
1.
2.
3.
4.
5.

Overall
1.9.204/OC4/3/Intel E8500 E0@4940mhz/Team Xtreem DDR 2 1066mhz CL5@520mhz,CL4-4-4-4/Abit IP35 Pro/Dtek Fuzion V2/Window XP SP2 Daily/45467 PP

» Click to show Spoiler - click again to hide... «

2.9.39/OC4/3/Intel E8400 C0@4824mhz/Crucial Ballistix Tracer@536mhz,5-5-5-10-2T/Abit IP35 Pro/Dtek Fuzion V2/Window XP SP2 Daily/45297 PP

» Click to show Spoiler - click again to hide... «

3.11.812/Jibek/Intel E8400 E0@4012Mhz/Team Xtreem DDR2-1066 CL5@642.0Mhz,CL5-5-5-15/Gigabyte EP45-UD3P/Xigmatek S1283/Windows XP SP3 Daily/47389 PP
http://forum.lowyat.net/index.php?act=Atta...=post&id=753137
4.
5.

Which ram to get for daily

OC4/3 — Mon, 15 Dec 2008 02:16:47 +0800

Hey all,

I am planning to get some daily ram in future.
Capacity must be 4GB,what will you guys recommend?
Budget is kinda tight,~RM500 and oh it is a DDR 2 platform.

GTL Reference Tweaking discussion thread

OC4/3 — Mon, 10 Nov 2008 01:31:56 +0800

GTL Ref is important for ultra high fsb dual core oc/450FS+ Quad Core OC so i decide to start a discussion thread on this subject.
This is in my opinion,that most of the lyn ocer ignore this and only a few ocer realize the importance of gtl ref(cstkl1,bryanyeo87.vignesh and a few).+

Let us start by the definition of gtl ref:
Introduction to A/GTL+ Signaling Conventions

Most Intel processor Front Side Bus (FSB) signals use [Advanced] Gunning Transceiver Logic (A/GTL+) signaling technology. GTL is a standard for electrical signals in CMOS circuits used to provide higher data transfer speeds with smaller voltage swings. (The GTL signal swings between 0.4v and 1.2v with a reference voltage of about 0.8v.) Only a small deviation of 0.4 volts (or thereabouts) from the reference voltage is required to switch between on and off states. Therefore, a GTL signal is said to be a low voltage swing logic signal. This technology provides improved noise margins and reduced ringing through low voltage swings and controlled edge rates.

Gunning Transceiver Logic has several advantages. The resistive termination of a GTL signal provides a clean signaling environment. Moreover, the low terminating voltage of 1.2 volts results in reduced voltage drops across the resistive elements. GTL has low power dissipation and can operate at high frequency and causes less electromagnetic interference (EMI) and signal line crosstalk than previous solutions.

Intel platforms implement a termination voltage level for GTL+ signals defined as VTT. Because these platforms implement separate power planes for each processor (and chipset), separate VCC and VTT supplies are necessary. This configuration allows for improved noise tolerance as processor frequency increases as the voltage supplies are not coupled. Speed enhancements to data (4x) and address (2x) busses have caused signal integrity considerations and platform design methods to become even more critical than with previous processor families.

The A/GTL+ inputs require a reference voltage (GTLREF) which is used by the receivers to determine if a signal is a logical 0 (low) or a logical 1 (high). GTLREF must be generated on the motherboard (usually derived from VTT by a passive voltage divider network). Termination resistors (RTT) for A/GTL+ signals are provided on the processor silicon and are terminated to VTT. Intel chipsets will also provide on-die termination, thus eliminating the need to terminate the bus on the motherboard for most A/GTL+ signals.

Guide to adjusting/fine tuning gtl ref:
http://www.thetechrepository.com/showthread.php?t=87
http://ocxtreme.org/main/?q=node/1&page=0%2C0
http://edgeofstability.com/articles/dfi_p35/gtl/gtl3.html
http://forum.xcpus.com/overclocking/12932-...king-guide.html

WTA:Intel Xeon E3120

OC4/3 — Fri, 29 Aug 2008 01:45:21 +0800

Hi,all dealer/bulker/lyner,I want to ask,where can i get Intel Xeon E3120??
This is the brother variance of E8500 Anyone can give me price and availability?Thanks

If you are given 10k to spend on pc

OC4/3 — Tue, 19 Aug 2008 02:23:40 +0800

Hi,all lyner.If you are given 10k(Can over or under a bit) to build a pc,just box only.What parts would you choose to build it and purpose/why you choose to build a rig that way?
Just a lame question

My turn:
Intel Core 2 Duo E8600 RM890
Biostar Tpower I45 RM480
Team Xtreem DDR 2 1066 2GB RM340
Nvidia GTX260 RM1100
WD Veloci Raptor 300GB RM980
WD 640GB SATA RM255
LG SATA Optical Drive RM85
Corsair HX620W RM460
Lian Li PC7 RM285
Cooling:
Dtek Fuzion V2
Liang D5 Vario
Swiftech Micro Res
Tygon 1/2" ID tubing
Lian Li dual fan top cover
2xMid Speed Yate Loon 120mm
Swiftech MCR220
RM1100 or so
Total for rig=RM5870
RYBA copper pot RM650
Spare Benching Item:
Biostar Tpower I45 RM480
1xIntel C2D E8600 RM890
Team Xtreem DDR 2 1066 2GB RM340
Team Xtreem DDR 3 1600CL7 2GB RM700(Future usage and scare D9GTR extinct soon )
Intel Q9650 RM2000
Total=RM10555
Purpose and why:If 10k to spend on pc,this is the way i will spend because i bench a lot 2xE8600 for 2D usage and Q9650 for the occasion 3d/multi thread/video encoding usage.GTX260 is good enough for occasion gaming

Foxconn Nvidia Event showcase

OC4/3 — Thu, 24 Apr 2008 21:16:40 +0800

I have the honor of helping foxconn out at nvidia event.Our booth is mainly focus on overclocking and my daily rig is there.

Saturday
Saturday,i am there early to set up the booth.The demo rig is my daily rig,spec in signiture.We don't do a lot of thing on first day,mainly let people try out the power of
foxconn 8800GT on crysis. Only me and junkie_rubbish is there for saturday.

Sunday
After the saturday event,me and junkie_rubbish discuss via MSN and decide to end this event with something different so there it is.I have the honor of doing this showcase with local famous overclocker,coolice
Spec for second day:
DFI Lanparty LT X38-T2R(Cannot get Foxconn Blackops in time )
Intel Core 2 Quad 6600@3.6ghz
Custom Liquid Cooler(Swiftech Apogee GT,Single fan radiator,Nirox pump,Thermaltake Fan)
Crucial Ballistix 2GB Special Edition
Foxconn 8800GTS 320MB vmod/8800GT 512MB,Forceware 174.74 beta XP 32bit driver
Silverstone OP650 PSU

4500mhz SPI 1M challenge

OC4/3 — Tue, 08 Apr 2008 08:13:44 +0800

Challenge of 4.5ghz SPI 1M.

Rules & Requirements:
1.Only 4.5ghz,maximum of 10mhz if cannot get 4500mhz.
2. Following must include in a screenshoot:CPUZ showing CPU and memory setting and your SPI pass.
3. Provide details about your system. Include cpu, motherboard, ram.Follow the sample below
4. Every single window must clearly showing all the details that is required from rule no.2.
5.State which category you will be in.

QUOTE

Example of posting:
10.172/OC4/3/Intel E8400 wolfdale 6mb@4500mhz/Crucial Ballistix Tracer 2GB DDR 2 800@DDR 2 1000,5-4-4-8-2T/Abit IP35 Pro/Xigmatek SHDT 1283 + 180cfm NMB fan

» Click to show Spoiler - click again to hide... «

Wolfdale 6MB/Yorkfield 12MB
1.10.016s/dblooi/Intel E8600 wolfdale 6mb@4500mhz/Patriot 2GB DDR 3 1600@DDR 3 1802,7-6-5-15-1T/Foxconn Blackops/Xigmatek Achilles stock fan

» Click to show Spoiler - click again to hide... «

2a. 10.047/OC4/3/Intel E8400 Wolfdale 6MB C0@4505mhz/Team Xtreem DDR 2 1066@DDR 2 1060mhz,4-4-4-8-2T/Abit IP35 Pro/Dtek Fuzion V2

» Click to show Spoiler - click again to hide... «

2b.10.047s/saswan/Intel E8400 Wolfdale 6mb@4507MHz/2x1GB Team Xtreem PC6400 @DDR2 1126,5-5-5-15 2T/DFI Blood Iron/CM Hyper 212 Dual-fan
http://forum.lowyat.net/index.php?act=Atta...=post&id=641619

3.10.078/ALeUNe/Intel E8400 Wolfdale 6MB C0@4505mhz/Crucial Ballistix 2GB DDR 2 667@DDR 2 1060,4-4-4-12-2T/Abit IP35E/No info on cooler+
http://forum.lowyat.net/index.php?act=Atta...=post&id=472084

4.10.142s/dro/Intel E8400 Wolfdale E0 6mb@4500mhz/Crucial 10th Anny, 1200mhz, 5-5-5-10-2T/DFI P35 DK T2RS/Cooler Master Hyper 6+ CM 12cm case fan
http://forum.lowyat.net/index.php?act=Atta...=post&id=641917

5.10.265s/Hyde`fK/Intel E8400 Wolfdale 6mb@4505hz/2x1GB Cellshock PC2-8000 D9GKX@DDR2 1200,4-4-4-4 2T/Biostar TPowerI45/Xigmatek Achilles Stock fan
http://forum.lowyat.net/index.php?act=Atta...=post&id=637036

6.10.297s/zuhair/Intel E8400 wolfdale 6mb@4500mhz/OCZ flex XLC PC9600@1000,4-4-4-12-2T,DFI DK P35,TRUE
http://forum.lowyat.net/index.php?act=Atta...=post&id=546574

7.10.469s/s_5558/Intel E8400 wolfdale 6mb@4505mhz/Team Elite 2gb x1 - 500mhz @5-5-5-15/Biostar TP I45/Xigmatek 1283
http://forum.lowyat.net/index.php?act=Atta...=post&id=549804

8.10.515/mfcm/Intel E8400 wolfdale 6mb@4500mhz C0/Crucial Ballistix Tracer 2GB DDR 2 1000@DDR 2 1000,5-5-5-18-2T/DFI DK P35/Tuniq Tower 120
http://forum.lowyat.net/index.php?act=Atta...=post&id=462948

9.10.640s/lichyetan/Intel E8400 wolfdale 6mb@4500mhz/Crucial Ballistix 4gb + 2gb Crucial 10th Anniversary@5-5-5-15-2T/DFI Lanparty UT P35 T2R/Swiftech Apogee GT
http://forum.lowyat.net/index.php?act=Atta...=post&id=474711

Wolfdale 3MB/Yorkfield 6MB
1.12.000s/IcEMoCHa/Intel E7200 Wolfdale 3mb@4500mhz/2GB Crucial Ballistix Tracer PC6400@DDR 2 948,4-4-4-12-2T/Biostar Tpower I45/Watercooling
http://forum.lowyat.net/index.php?act=Atta...=post&id=552017

Conroe 4MB/Kentsfield 8MB

Conroe 2MB

Conroe 1MB

Celeron 512K

Allande 2MB

32M PI Overall
1.8m15.846s/acther/I7 920 Bloomfield 8MB@4510mhz/Corsair Dorminator GT DDR 3 1866mhz CL7@DDR 3 1718 CL7-7-6-18-1T/Mobo infor please/Watercooling
http://forum.lowyat.net/index.php?act=Atta...=post&id=912164
2.09m56.610s/M0b1us/Intel E8600 Wolfdale 6mb@4496mhz/Chaintech ApogeeGT 2GB kit DDR 3 2000 @ DDR 3 1873 CL7-6-5-18 1T/Asus P5E3 Premium/Watercooling

» Click to show Spoiler - click again to hide... «

3.10m 13.594s/Hyde`fK/Intel E8400 Wolfdale 6mb@4505hz/2x1GB Cellshock PC2-8000 D9GKX@DDR2 1200,4-4-4-4 2T/Biostar TPowerI45/Xigmatek Achilles Stock fan
http://forum.lowyat.net/index.php?act=Atta...=post&id=637140
4.10m28.234s/sup3rfly/Intel E8500 Wolfdale 6mb@4500mhz/Team Xtreem OPB Edition 2GB DDR 2 800@DDR 2 1000,4-4-3-4-2T/Asus Rampage Formula/Watercooling

» Click to show Spoiler - click again to hide... «

5.10min59.234s/OC4/3/Intel E8400 wolfdale 6mb@4500mhz/Team Xtreem DDR 2 1066@DDR 2 1000 4-4-4-4-2T/Abit IP35 Pro/Dtek Fuzion V2

» Click to show Spoiler - click again to hide... «

32M PI DDR2
1.10m 13.594s/Hyde`fK/Intel E8400 Wolfdale 6mb@4505hz/2x1GB Cellshock PC2-8000 D9GKX@DDR2 1200,4-4-4-4 2T/Biostar TPowerI45/Xigmatek Achilles Stock fan
http://forum.lowyat.net/index.php?act=Atta...=post&id=637140
2.10m28.234s/sup3rfly/Intel E8500 Wolfdale 6mb@4500mhz/Team Xtreem OPB Edition 2GB DDR 2 800@DDR 2 1000,4-4-3-4-2T/Asus Rampage Formula/Watercooling

» Click to show Spoiler - click again to hide... «

3.10min59.234s/OC4/3/Intel E8400 wolfdale 6mb@4500mhz/Team Xtreem DDR 2 1066@DDR 2 1000 4-4-4-4-2T/Abit IP35 Pro/Dtek Fuzion V2

» Click to show Spoiler - click again to hide... «

32M PI DDR3
1.09m56.610s/M0b1us/Intel E8600 Wolfdale 6mb@4496mhz/Chaintech ApogeeGT 2GB kit DDR 3 2000 @ DDR 3 1873 CL7-6-5-18 1T/Asus P5E3 Premium/Watercooling

» Click to show Spoiler - click again to hide... «

I7 32M PI
1.8m15.846s/acther/I7 920 Bloomfield 8MB@4510mhz/Corsair Dorminator GT DDR 3 1866mhz CL7@DDR 3 1718 CL7-7-6-18-1T/Mobo infor please/Watercooling
http://forum.lowyat.net/index.php?act=Atta...=post&id=912164

Intel Overclock team,recruit

OC4/3 — Thu, 31 Jan 2008 22:04:18 +0800

Hi,i just start a team and only complete 5x wu.Need more person,come come.Folding to help people.