Lowyat.NET: Latest posts in ZTE MF622 pigtail Antenna

Post #10

Matrix — Mon, 30 Jun 2008 14:29:34 +0800

QUOTE(niknik068 @ Jun 21 2008, 07:03 PM)

XP Instalacion problem with ZTE MF622.Can be solved by using USB CABLE FOR NOKIA PHONE symbian.During the instalation skip restart of pc.And it work.For MAC you must find drivers on net. niknik068

[addedon]June 21, 2008, 7:05 pm[/addedon]

XP Instalacion problem with ZTE MF622.Can be solved by using USB CABLE FOR NOKIA PHONE symbian.During the instalation skip restart of pc.And it work.For MAC you must find drivers on net. niknik068[COLOR=red]
[right][snapback]18116664[/snapback][/right]

For MAC, no need to find drivers. Just install with the CD that comes along with it, plug in your ZTE and you're good to go.

Tested on my Hackintosh with Celcom.

As for people who have problem with the installer popping up, try this:

(1) If connect using the long USB cable, make sure you plug BOTH USB into your PC.

(2) If one way doesn't works, try to swap it or to other USB ports.

(3) Or just use the short USB cable and plug to one USB port. Again, if it doesn't work, try other USB ports.

I've the same problem on one of my laptop. According to the seller, it's due to some USB ports not enough juice to power it.

On other PCs and laptops, the installer can pop up without any problems. I suggest in the event the installer pop up in your explorer.

MAKE A COPY OF IT TO YOUR HARD DISK OR SOMEWHERE ELSE.

So you still have a copy of it next time in case the mysterious drive doesn't shows up again.

Post #9

niknik068 — Sat, 21 Jun 2008 19:03:06 +0800

QUOTE(Jerrylim @ Jun 14 2008, 09:13 AM)

hie all.... i need some advise here for MF622 modem.
Currently i jus bought it from u-mobile. but i m using it for celcom broadband.. wat happened is i connected to pc but it cant auto intall d driver. Does it means that the modem itself doesnt contain the celcom's dial up software? how can i make sure my modem can work with celcom broadband??
[right][snapback]17966377[/snapback][/right]

QUOTE(xptitan @ Jun 15 2008, 02:52 PM)

Brother, modem itself got the installer. i just get the experience few days ago from u-mobile. u can use celcom on it. tested and no problem, what you need to do is go to the setting side and add a new profile and dont type anything over there. try to reconnect it. any problem you can post it here and i will do my best to solve your problem.
[right][snapback]17986368[/snapback][/right]

Post #8

xptitan — Sun, 15 Jun 2008 20:52:28 +0800

QUOTE(Jerrylim @ Jun 14 2008, 03:13 PM)

Post #7

Jerrylim — Sat, 14 Jun 2008 15:13:30 +0800

Post #6

mazdagtr210 — Sun, 01 Jun 2008 14:16:40 +0800

how to modified using another pigtail antenna...

Post #5

guar — Thu, 08 May 2008 05:27:29 +0800

Hi

I still have no reply of ZTE to this.

But now to this:

QUOTE

personally i dont think that is the case..

i own this modem.. i still think the external antenna can be used for 3G / HSDPA..

The guys of the three support told me that the modem has two antennas build in. One which transmits on GSM/2G frequencies. This antenna is connected with the antenna port at the back. The second antenna operates at the G3 frequencies. For frequencies see: http://www.gsmworld.com/using/spectrum/frequencies.shtml. This sounds conclusive to me (I am speculating too, only ZTE can say something more about this issue or an engineer who deassambles this modem).

In my opinion the best would be if as many owners of this modem as posible would write emails to the support of ZTE to get more detailed informations. I am looking for more information to get this device running under openSuSE aswell. So please to everyone send them emails. Their url is http://wwwen.zte.com.cn/ and this is their email support@zte.com.cn.

As soon as I get more information I'll post them here.

Post #4

fruitie — Fri, 02 May 2008 03:12:35 +0800

I'm using this modem as well, oh so it has antenna for it? Wow, I'll be surely interested in it.

Post #3

dinster — Thu, 01 May 2008 18:34:37 +0800

QUOTE(guar @ Apr 29 2008, 04:56 AM)

Hi

just got the same modem. As it is a 3 modem I rang their support. According to them this antenna socket is only for 2.5G mobile networks. 3 does not recommand to attach anything to it. So if you are looking for a antenna to improve the 3G signal that might not be an option. I also wrote a mail to ZTE but still wait for a reply

Why do you need the antenna?
[right][snapback]17041384[/snapback][/right]

personally i dont think that is the case..

i own this modem.. i still think the external antenna can be used for 3G / HSDPA..

Post #2

guar — Tue, 29 Apr 2008 04:56:46 +0800

Post #1

www.Code2all.Com — Wed, 23 Apr 2008 14:53:59 +0800

I'm looking for a pigtail antenna for ZTE MF622 HSDPA usb modem. I saw there is a connector underneath the modem for antenna

Anyone has any idea where to get this kind of stuff?

Thanks