Lowyat.NET: Latest posts in AMD Socket-939 Overclocking Database

Post #270

bulibulizaimon — Sat, 30 Aug 2008 13:12:44 +0800

OC ur CPU using ClockGen

OC ur VGA using Coolbits

Post #269

edkiasu — Mon, 07 Jul 2008 15:02:03 +0800

Here, i feel like wanna OC my system.. Because when i play crysis or assassin's creed, will felt laggy and sometimes even hang for few seconds when there're high graphic effect..

Below are my system's specs:
PSU - SilverStone ST400 400W Real Power
Mobo - Abit kn8 ultra
Proc - AMD64 3000+ venice core 1.8MHz
GC - Msi 9600GSO-OC
Ram - Corsair Value Ram DDR400 PC3200 (2x1GB)

Some CPU-Z and GPU-Z attached as below:

Details of my CPU

Details of my Mobo

Details of my Ram

Details of my GC

Please teach me how to OC all those things at stable status, ur help is much much appreciated!!

Post #268

Holi^oNe — Mon, 21 Apr 2008 19:49:35 +0800

I tried to force flash and also winflash but both didnt work. The chip is recognized as an A8N-SLi Bios but the core information is all the latest one for the DFI board.

So my solution right now is to either buy a replacement chip online or request / pay a fellow forumer to help do a hotflash.

To anyone who has a Lanparty SLi-DR Expert within the Klang Valley who is willing to do a BIOS hotflash. Please drop me a pm. I won't mind paying abit of money for your services.

Thanks alot.

Post #267

e-jump — Sat, 19 Apr 2008 07:04:37 +0800

why windows, when you can also do it in DOS.
I did cross flash my epox 9nda3+ on msi neo2 plat in DOS

1. boot neo2 into dos
2. replace epox chip in
3. force flash (use /f switch or something)
4. . .
5. PROFIT

Post #266

Holi^oNe — Sat, 19 Apr 2008 05:33:41 +0800

Might be against forum rules , but I figured I'd try my luck here.

Can anyone help me with the problem I'm facing ?

I'm running an opty 144 with a DFI SLi-DR Expert board.

Earlier after 2 years of not touching my pc went and tinkered with my perfectly okay system and I "accidentally" shorted the clear CMOS jumper while the system was still running. So naturally the system tripped. Now I can boot up but I'm not able to enter my BIOS.

I have a hunch that all I need is to reprogram the BIOS. I checked and I found out that the Asus A8N-SLi board uses the same BIOS chip as the Lanparty SLi-DR Expert. My question is if anyone knows wheter I can hotflash the BIOS chip in windows mode using the winflash utility with a different brand motherboard ? Or would my chances be better using a DFI board to hotflash ? Any help from forumers would be greatly appreciated (if possible via pm)~! Thanks in advanced.

Sorry if I posted in the wrong section.

Post #265

^KamilskaZ^ — Sun, 24 Feb 2008 22:32:32 +0800

QUOTE(speedrider @ Jan 6 2008, 05:03 PM)

I'm stressing it more...

CPU: AMD 3200+ @ 2.34GHz, 260MHz FSB * 9.0 multiplier (Winchester)
RAM: 2* 512MB KVR chipset HYNIX DT-D43 3-4-4-8 divider 333MHz @ DDR426
Mobo: Abit fatal1ty AN8 SLi
But this time, I'm using stock HSF. Air cooling...
[right][snapback]15003871[/snapback][/right]

bro nice ram ur have.my experient,ur can try 1:1 divide with 2.85v and timing 3-3-3-8

Post #264

speedrider — Mon, 07 Jan 2008 22:34:10 +0800

QUOTE(soulfly @ Jan 7 2008, 12:02 AM)

cpu stepping dude?
[right][snapback]15009934[/snapback][/right]

oops sorry boss... I forgot to check the cpu stepping. But i'll update it on this weekend.

this is the CPU verification. Sorry. I've snapped it with CPUZ v1.4, but validate it using v1.43

http://valid.x86-secret.com/show_oc.php?id=293762

Post #263

limsa007 — Mon, 07 Jan 2008 01:25:40 +0800

Mobo: Abit AN8 Ultra
CPU: AMD 3500+ @ 2.5GHz, 277MHz FSB * 11.0 multiplier (Venice) 1.625V, NBBWE 0607CPCW
RAM: Kingson 512mb Kingston Cheapset x2, Kingston 512mb Samsung x2, 2.5-3-3-7, pc3200
Heatsink: TT Silent Tower

http://valid.x86-secret.com/show_oc.php?id=293300

Post #262

soulfly — Mon, 07 Jan 2008 00:02:32 +0800

cpu stepping dude?

Post #261

speedrider — Sun, 06 Jan 2008 17:03:27 +0800

I'm stressing it more...

CPU: AMD 3200+ @ 2.34GHz, 260MHz FSB * 9.0 multiplier (Winchester)
RAM: 2* 512MB KVR chipset HYNIX DT-D43 3-4-4-8 divider 333MHz @ DDR426
Mobo: Abit fatal1ty AN8 SLi

But this time, I'm using stock HSF. Air cooling...

Post #260

nadeng1987 — Sun, 04 Nov 2007 06:33:43 +0800

QUOTE(mars @ Oct 30 2007, 06:45 PM)

Hoho... i'm still stuck with skt 939......... still surviving for now..... I think Athlon 64 not a bad proc though ... could last several years........
[right][snapback]13862904[/snapback][/right]

hehe. agree with ya. my 939 rig stil running rite now after more than 2 years. give it to my brother to play. haha.

Post #259

mars — Tue, 30 Oct 2007 18:45:13 +0800

Hoho... i'm still stuck with skt 939......... still surviving for now..... I think Athlon 64 not a bad proc though ... could last several years........

Post #258

xtorm — Sun, 14 Oct 2007 00:44:53 +0800

curently looking for a proc, hmm seems like athlon venice E3 is better then E6 rite? i got 2 choice now, will b pairing it with jetway 939gt4

Post #257

gtoforce — Tue, 28 Aug 2007 02:01:20 +0800

hey
noob here
air means just the hsf right?

[addedon]August 28, 2007, 2:02 am[/addedon]anyways, last time i oc'd my winchest on the orignal HSF
only managed to go from 1.8 to 2.1
dunno why

did it on my previous k8n-neo2 platinum

Post #256

slash — Sat, 25 Aug 2007 14:01:30 +0800

haha. but pretty interesting to read the postings, then see the pics.
"here's wat i get with 1:1 HTT ratio" then the pic of a girl with quite evenly sized boobs. LOL

Post #255

soulfly — Thu, 23 Aug 2007 10:28:31 +0800

lol.... i guess the image hosting taken over by porn image gallery already!

Post #254

tachlio — Thu, 23 Aug 2007 00:02:42 +0800

lolz why 1st page pic all is like that d??

Post #253

speedrider — Thu, 01 Mar 2007 17:29:22 +0800

QUOTE(soulfly @ Mar 1 2007, 05:18 PM)

why 'alang-alang'? just another few more minutes to 8hrs.

and btw use 10x is better.
[right][snapback]10570831[/snapback][/right]

Winchester on-die mem controller not so good. I cant get x10 multiplier with 260 FSB using KVR. On the other side, most of OCer prefer to use Venice, so its looks Im alone using winchester, and lack of Gurus as a advisor to fine tune it.

On the day I've captured the screenie, Im rushing to go to workplace, and its a risk to put my PC on 24/7 due to my house power supply not efficient to support refrigerator, washing machine blablabla....

NVM, its not a priority for me to get into the ranking, maybe as a contributor for what Winchester can achieve is a satisfactory for me. At least, I hope there will be a Winnie 3200+ user will show up what they have done with the most unpopular CPU

[addedon]June 24, 2007, 4:38 pm[/addedon]

QUOTE(speedrider @ Mar 1 2007, 04:54 PM)

Dont know whether pass or not...

CPU: Winchester 3200+ @ 2.342GHz, 260*9, 1.50V
Mobo: ABIT Fatality AN8 SLi
Ram: KVR Hynix DT-D43 512x2 using divider 333mhz, 2.5-3-3-6
Water cooled using TT Big Water, battery water

CPUz Dump file
[right][snapback]10570377[/snapback][/right]

UPDATED: PASS 12 HOURS STRESS

CPU: Winchester 3200+ @ 2.343GHz, 260*9, 1.60V
Mobo: ABIT Fatality AN8 SLi
Ram: KVR Hynix DT-D43 512x2 using divider 333mhz, 3-4-4-8
Water cooled using TT Big Water, battery water

Post #252

soulfly — Thu, 01 Mar 2007 17:18:53 +0800

why 'alang-alang'? just another few more minutes to 8hrs.

and btw use 10x is better.

Post #251

speedrider — Thu, 01 Mar 2007 16:54:26 +0800