Lowyat.NET: Latest topics in Totally Uglied & Vamped

Clearance sale : NBM 120mm fan, 0.22amp, 1600rpm., Limited quantity + SFLEX 120mm.

uglyvamp — Fri, 10 Jul 2009 12:54:36 +0800

Not shown in picture :

4pin mobo extension
24pin ATX mobo extension
Sata hd cables
ATA hd cables

Replacement pins :
ATX pin
male/female molex pin
Fan pins

++++++++++++++++++++++++++++++++++++++++++++++++

24pin normal ATX to 24pin mini ATX - Rm 15

Molex extension cable, 50cm - Rm 5

4pin PWM extension cable for fan, 33cm - Rm 3

3pin fan extension cable, 33cm - Rm 2

Sata power extension cable, 31cm - Rm4

PCI-E extension cable, Rm 9

3x 3pin converter to 4pin molex - Rm 5

4x 3pin converter to 4pin molex ( short ) - Rm5

3pin fan splitter - Rm 3

Delivery date to JB post laju : Updated weekly., Bank transfer then I post out.

uglyvamp — Tue, 30 Jun 2009 13:04:45 +0800

Here's a new thread for my loyal customers

I'll update here on a weekly basis at least to tell you my next visit to Johor Bahru's Pos laju.

You can also ask me here on the status of your purchase as I usually have a lot of PMs to monitor & it gets very messy after few days whenever I put up new stuffs for sale.

Guys who like to purchase bulky items like computer case from either Silverstone or Lianli can arrange with me for C.O.D at either Batu Pahat or JB.
I only go back to Batu Pahat, my home town once every mth or 2mths, so don't miss out !!

Delivery to JB will be cut short unless the orders here is a lot. For example, 2 to 3parcels to post out only, I may not make it a trip to JB post that week but postpone to the next. I"m sorry about this guys, I'm trying to minimize risks of unncessary incidents in JB.

Please do check out my online product catalogue at

ONLINE PRODUCT CATALOGUE

Then PM & proivde me the color & quantity of the items you would like to purchase & I shall revert back to you via PM.

U can also MSN me at : uglyvamp@hotmail.com

Cable management accessories., sleeving, heatshrinks, cable holder, tie

uglyvamp — Thu, 14 May 2009 20:17:09 +0800

Prices will be updated soon. The product below will be sold by the metre length.

Round sleeving for cables. Below is a sample of the result. come in 3sizes.

Black - 10mm, 6mm, 3mm
White ( biege ) - 3mm, 5mm, 9mm

heatshrinks available in ( mm ) :

Black - 25mm, 16mm, 13mm, 8mm, 5mm, 3.5mm, 2mm, 1.5mm

White - 12mm, 2mm, 0.5mm

Cables : Molex, 3pin, 4pin, 6pin, 8pin, 24pin, PWM, extension, splitters, converter

uglyvamp — Wed, 13 May 2009 17:46:51 +0800

Not shown in picture :

4pin mobo extension
24pin ATX mobo extension
Sata hd cables
ATA hd cables

Replacement pins :
ATX pin
male/female molex pin
Fan pins

++++++++++++++++++++++++++++++++++++++++++++++++

24pin normal ATX to 24pin mini ATX

Molex extension

Sata power to molex adapter + splitter

4pin PWM extension cable for fan

3pin fan extension cable

Sata power extension cable

PCI-E extension cable

3x 3pin converter to 4pin molex

3x 3pin converter to 4pin molex ( short )

3pin fan splitter

Watercooling stuff, waterblocks, radiators, reservoirs, etc

uglyvamp — Wed, 13 May 2009 16:26:06 +0800

Great price for OCZ CPU Waterblocks - RM 160

CPU supported : All AMDs, Intel 478, 775. ( 1366 bracket not available yet )

http://www.ocztechnology.com/products/cool..._cpu_waterblock

HydroFlow HF-MK1 CPU Waterblock / For AMD, AM2, 775, 1366 / Core i7 Compatible

Designed with the highest possible exchange rate between the block and coolant, the HydroFlow can be easily integrated into any enthusiast water cooled system and help efficiently lower the processor temperature. The HydroFlow is compatible with AMD and Intel processors, including the latest generation Core i7 CPUs.

The triangular fins in the HF-MK1 provide the highest volume to surface ratio of any geometric shape for best dissipation possible, and this special design also creates sufficient turbulence to eliminate the “skin” effect caused by laminar flow. The base block of the HydroFlow increases center contact with the processor core for the greatest possible cooling potential, ensuring maximum exchange and functionality between the waterblock and CPU.

Whether you’re a first-time builder or a seasoned case-modder, OCZ makes the HydroFlow easy to integrate into your rig by supplying both high-flow 3/8” and 1/2” barbs in the packaging without the hassle of searching for compatible hardware.

Dimensions :

5.5 cm x 5.5 cm x 1.75 cm

Included Accessories:
1/2" and 3/8" barb adaptors
4 x Springs with Thumb Screws
4 x Hold Down Screws
4 x AMD Washers
8 x Intel Washers
4 x AMD / Intel Bolts
1 x AMD / Intel 775 / Intel 1366 Bracket
1 x Hex Key
1 x Generic thermal compound

Online purchase @ Uglyvamp - 2009 coming up !, X-COMING BACK-X sales, great stuffs

uglyvamp — Fri, 08 May 2009 15:01:14 +0800

I never left, and I will never leave LYN.

The next episode of Uglyvamp's sales coming up next.

I'll be posting here for the sales item instead of BULK / Garage section. It'll be easier to keep track in my own section & proper display of our product range.

Brought to u by Uglyvamp, once again.

Please understand how I run my business here., My service, my pain, my troubles.

uglyvamp — Thu, 06 Nov 2008 16:34:02 +0800

Today at 10am on the 29th of September 2008, I left Singapore for JB on a high morale, because its just another Pos Laju day for my valued customers from LYN.
Its a Monday, I thought i better get things sent today ( MOnday ) so most parcels will arrive on time by tomorrow or just after Raya.

And so I did wat I will be doing : Pos laju for u guys, all the way from my store in S'pore. I've scheduled this a weekly basis, sending out on every Mondays if time permit, if not every Tuesday.

Then, when my job was completed, I went off with my gf for a good lunch at Skudai, followed by petrol top up & enroute back to S'pore to open shop for business.

It was on a half heavy traffic along Jalan Johor Bahru Air Hitam, KM 7. A light brown proton hatchback infront suddently jammed his brake, I could see tire smoking & within seconds, his vehicle skidded right, hit the road kerb, bounced left, and skidded right again. I was confident I had good safety distance + speed to put my vehicle to a halt in time.

However, a double check on my rear view mirror showed the black vehicle behind following a little too closely, he does not even seem to be braking at all. My next reaction was to check LEFT for clearance, and so it was clear. I hit my brake almost hard ( probably 70-80% ) and swerved out into the left lane. I could feel the ABS brake kick in & 1 small light screech on my tire(s). My new GE6 ( Fit 2008 ) did not skid at all & managed to stop in time. THere were vehicles infront already slowing down coming to a halt. I couldn't accelerate further anymore to get out of the situation. This is the less faithful moment when the Black vehicle behind which I still assume was not attentive enough hit us both. Yes, that's both the vehicle infront of me earlier that skidded & me. The light brown vehicle did not hit the vehicle infront of him at all, he managed to "swerve & stop" in time.

THank goodness, no one person was hurt.

But ..... pain sank deep inside my blood.

My new vehicle in JB town after POS LAJU on the way back to Singapore to open shop.

Boot door damaged, Rear bumper damaged. Exhaust damaged.

The vehicle that crashed into me. I had ample time & distance to brake my car & put it to a safe stop but not the vehicle behind
I think he wasn't attentive.

Spare tire compartment, the dent is on the left side of picture.

plastic body panels crashed in too,

everything is like so out of position now .....

bumper rubbing tire as the car moves, had to pull out the bumper a little to avoid rubbing the tire.

reverse camera damaged. can see the back impact bar protruding out.

So sad. I dont wanna do Pos Laju for u guys for the next few weeks at the time being
It will not be never, but I guess I'll just take a break gentlement.

No more taking in orders for the time being till I get things fixed up.

My Modding Gallery. Mid-End to Super High end rigs, Our art of work, our creations, our idea

uglyvamp — Sat, 11 Nov 2006 01:25:26 +0800

First, we'll start off with my :

Complete PSU SLeeving guide : with details & pictures

Here's my humble Socket A setup, without muscles inside. This setup is being used as my demo pc in shop. We try to display our "wireless" setup & our casemodding accessories, though its the least impressive of wat we've done so far.
Our humble demo pc

Below are direct links to our work posted at Casings & Modifications section.
CLick on the links below to be amazed

First TJ-07 setup : Watery & Fiery inside : A daring green + red uv setup

Project Eye of the Storm : Black neat midtower, showing more UV effects

2nd TJ-07 setup : XFX's Demo rig for Computex 2006 in Singapore : Color theme is all green

3rd TJ-07 setup : Project ICE BLUE on Crossfire, all .. bluess !!

Lianli V1000 : Silent black beauty. LED is alive !!

Ugly midtower revamp !! Whola .... 1 of my fav work

Project Quad SLI : our biggest setup uptodate. almost RM 30k rig

New PSU sleeving Galleria 2006 / 2007, nothing but pictures of beautiful PSU

uglyvamp — Fri, 07 Jul 2006 16:46:00 +0800

Here comes the gallery ... and dont loose ur jaw

The next coming BBS COD details. Check regularly., Location / Date / Time.

uglyvamp — Wed, 12 Jan 2005 03:29:43 +0800

BBS 7 - Cannot confirm exact date yet, but we wont be bringing everything & too much things this time, thus we need to take orders in advance. Please browse to UVshop online store !! for all our product details.

Date : Tentatively 24th & 25th March 2007 ( for the Lanparty )

BBS 6 - 4th & 5th November 2006 ( 1.5day only !! )

** End 5th Nov ( Sunday ) around 3-4pm

Venue : LOWYAT PLAZA - B4 carpark : Honda CRV Grey color No. 663

Time : 4th Sat ( 1-2pm to 8-9pm ) & 5th Sun ( From 1-2pm to 4pm )

NOTE : I'll be staying overnite at Capitol hotel, so for guys who can only come at nite also can contact me by 9-10pm k

Contact : 012 7111533 ( line will only active on 3rd Nov nite time )

BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBS !!

BBS 5 - 15th July 2006 ( 1.5day only !! )

** End 16th ( Sunday ) around 3pm

Venue : LOWYAT PLAZA

Time : 1pm B3 or B4 carpark ( to be anounced on that day, SMS for details )

Contact : 012 7111533 ( line will turn on only on 15th July )

BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBS !!

BBS Part 4 : The COD October 2005

Sat Full day & Sunday till 5pm Location : LYP area

Confirm Dates : 5th & 6th November 2005

1st day success.. !! 1 more day ( 6th Nov 2005 ) to go

________________________________________________________________

BBS Part III : The COD JULY 2005

CONFIRM Dates : 1st July 3pm to 3rd July ( 6pm )

SUCCESS !! - Thanks for the turn up & patience !! Can't serve everyone at the same time though. Sorry to those who had difficulty getting through, B4 carpark lah .. hard to get through. Next will be BBS 4 !! Found at better place to deal this time. THanks for all the support again.

1st July - 1pm - 7pm, after 8pm sms if i was able to meet u
2nd July - 2pm - 8pm. After 8pm, sms if he i was able to meet u
3rd July - Wake around 11am, leave KL by 5

Location : Lowyat Plaza

Staying overnite at : Capitol Hotel

SMS or CALL me on these dates to check my location & type of car i'm driving !!

All you want to know bout BBS III :

- Everything I sell will be available.
- Prices will be reduced & quoted on the spot !!

- NO deposit needed, just come ..... strong stock status

SLEEVING Serivce :
- Buy any 5m sleeving pack & get ur PSU sleeved for another RM 5
- Balance unused sleeves will be returned back to u of course .. heehee
- only doing maximum 5psu per nite. So I'm only taking in max of 10psu.
- Collect the next day from me or from a stall at LYP. ( to be arranged )

40mm to 120mm fan :
- There'll be a small testing facility for everyone to test the fan performance

My CONTACT Number : 012 7111533

______________________________________________________________

BBS Part II

Meet up Sales Ended - SUCCESS !!! Thx for the forever tremendous support

Date : 17th January 2005 & 18th January 2005
( pls note there'll be a COD for every part of BBS )

Time : 2pm onwards till the next day. I'll be staying 1 nite at Capitol Hotel.
( u can visit me b4 i sleep, usually by 12am is alright )

Location : Lowyat Plaza. ( most likely B3/B4 carpark )
( I'll have too many items to carry around unless someone in LYP plaza can spare me a trolley & space )

Uglyvamp's PERSONAL DETAILS : Add, bank, tel, msn, Banking details, Address, Contact no.

uglyvamp — Wed, 12 Jan 2005 03:19:08 +0800

Latest update 2.06pm, August 21st, 2008.

I've changed my MSN for LYN to uglyvamp@hotmail.com.

My original lists of contacts in MSN under the previous add has been deleted. So please add me @ uglyvamp@hotmail.com to ur MSN !!

The address to our retail store in Singapore is :

No.1 Rochor Canal Road,
#03-19, Sim Lim Square,
Singapore 188504.

Tel : 65 63339871

Online blog where we updates our projects, promotions, etc : www.uvnium.com
Online product catalogue can be found here : www.uvnium.com/uvshop

wat frends & family call me : Gary

Nationality :
Malaysian & Singapore PR (50% in msia, 50% in spore)

Residential Address Msia :
No.25, Jalan Perdana 40A, Tmn Bukit Perdana, 83000, Batu Pahat, Johor, Msia

Banking Info :
Maybank - 1 0 1 4 6 8 0 4 3 5 0 1
Tan Hau Hong

Contact info :

Mobile Maxis Msia : +6012 7111533

Mobile M1 Spore : +65 97640764

Email : garytan@uvnium.com

ICQ : 36939597

MSN : uglyvamp@hotmail.com